Fin Igniter

*
Call for pricing

Specifications:

Resistance Wire Nickel Chromium Resistance Heating wire
Sheath Material SUS201,SUS202,SUS304,SUS316L,Titanium
Tube Diameter 6mm-20mm (can be customized)
Tube Length 50mm-3000mm (can be customized)
Maximum Temperature 800degree Celsius
Wattage Tolerance +5%, -5%
Voltage 110v-440V (can be customized)
Length Tolerance ±1mm
Diameter Tolerance -0.2mm
Standard Cold Section 5-10mm (can be customized)
Insulation Resistance (cold)

 >500 MOhm

Maximum Leakage Current (cold)

 <0.5 mA

Core MgO
Lead wire Nickel manganese(Max. Temp. 800degree Celsius)
Seal Epoxy (Max. Temp. 800degree Celsius)

 

Features

  1. Simple structure, high heating power
  2. Easy and economical installation
  3. Designed and manufactured with good materials
  4. Uniform heating
  5. Accurate dimensions, maximum heat transfer
  6. Easy maintenance and replacement
  7. CE & ROHS approved

Benefit:

(1) Generally, Cartridge Heater has a long cold section at both ends, which cannot heat up effectively. Therefore, highly recommend to use the specific single-head heating tube imitated from import model produced by our company. Its characteristic is that there is only one cold section which is generally 1cm or so.

(2) The heating section power should not exceed 10 watts/cm. For example, for a 30cm long heating tube, the power should not exceed 300 watts as much as possible. If the power exceeds the limit, the heating rod surface load will be high, and the steel pipe will be easily oxidized and corroded, resulting in a short circuit. But the power of Cartridge Heater produced by HCDR can reach 20 watts/cm. So the heat conduction must be good. The clearance fit is generally within 0.05mm, and the dimensional accuracy of the SLM type heating elements produced by our company is +-0.05mm .

Cartridge Heater Applications:

  • Seal bars
  • Rubber molding
  • Food production
  • Immersion tank heating
  • HVAC compressors
  • Medical devices
  • Sensor measurement devices
  • Extrusion
  • Die casting
  • Hot melt adhesives
  • Heat staking / hole punch
  • Plastic welding
  • Fluid heating
  • 3D Printers

To Order Cartridge Heater Please Specify :

  • Material ( tube material and wire material)
  • Diameter
  • Overall sheath length
  • Wire length
  • Termination type --- Swaged-in Leads or Terminal Leads
  • Wattage and Voltage
  • Quantity

Note:The more details provided, the better it'll be designed and fits the application